High Temperature Accelerometer MS1000T
HIGH TEMPERATURE MEMS ACCELEROMETER – FOR DRILLING
The New MS1000T is the best in class MEMS accelerometer specifically designed for high-temperature directional drilling applications.
This accelerometer takes benefit from MS1000 and TS1000T family, to make it the best MEMS product made specifically for high-temperature and drilling market.
ADVANTAGES
-
Uniquely Designed For Drilling
-
Built-In Self-Test Function
-
Ensures Safety & Reliability
USE CASES
-
UAV & ROV Autopilot
Any sensor fixed to either UAV or ROV systems must be light and small and must have a low power consumption. In addition, high shocks resistance is a key element to keep the integrity of the IMU in case of crash. In terms of accuracy, the IMUs integrated on professional drones, should deliver accuracies corresponding to…
-
North Finding
North finding is critical for tactical navigation and target orientation localization. It is used either in fixed static observation systems or in hand-held portable devices. MS1000 implements an innovative microelectromechanical design and electronics which unleash unbeatable performances with regard to the long term bias and scale factor repeatability, in-run bias and vibration rectification error (VRE).
-
Inertial Navigation System Accelerometer
A key challenge for navigation systems is making them smaller, less expensive and more robust while preserving high-end performances grade. The innovative MS1000 accelerometer responds to tactical grade performance requirements due to the excellent bias and scale factor performances.
REQUEST A QUOTE
FEATURES
- High temperature range: -40°C to +175°C
- Excellent bias residual modeling error: < 4.5 mg (±30g, typ)
- Endurance to high repetitive shocks: 1’000g (500 times)
- Low Vibration Rectification Error: <170μg/g2 (±30g, typ)
SPECS
- Size: LCC20 (8.9*8.9*3.2) mm
- Operating Power Consumption: 10 mW
- Endurance Shock (500 times, 0.5 ms): 1000 g
- “Full-Scale Acceleration: +/- 2g and +/- 30g
- In run bias stability (Allan Var. @ 10s): 1.5 ppm of full scale
- Noise in band: <102 μg RMS (+/- 30g)
- Scale factor long term repeatability: < 500 ppm
- Operating Temperature: (>1000h): -40°C to +150°C
MS1000T
