Kannad Integra AP
Automatic, Portable ELT
Automatic portable ELT intended to be rigidly attached to the aircraft before the crash and connected to an external antenna but readily removable from the aircraft after a crash to be used as survival ELT (PLBPersonal Locator Beacon is a handheld device that can be used by individuals in remote areas in need of emergency services or rescue. A PLB will send a signal to the SARSAT satellites which then send that distress signal down back to Earth to the LUTs (Local User Terminals) which then send that information to an MCC (Mission Control Center) which can then dispatch search and rescue services to the location of the PLB.)
Integra ELTs are an extension of the range of Kannad ELTs. The development of this type of ELTs is based on the improvement of safety of flights either for light aircraft, business aircraft or commercial aviation. The safety of flights is strengthened thanks to a built-in GPSGlobal Positioning System is a navigation satellite system. See also giving a more accurate position transmitted within minutes following the distress and an Integral Antenna which may replace the main antenna in case on unavailability of the latter.
ADVANTAGES
-
GPS inside
-
Antenna inside
-
Portable
-
GPS Options
-
Economic installation
LEARN MORE
NEWS
REQUEST A QUOTE
FEATURES
- Automatic portable ELT: type ELT(AP)
- Cospas-Sarsat class II: operating temperatures -20° to +55°C
- Two-frequency transmitter (121.5 / 406MHz): 406.037 MHz ,operating life time 24 hours at -20°C 121.5 homing device, operating life time > 48 hours at -20°C
- 6 year battery life-time
- Short circuit protection
- Internal GPS receiver with internal antenna
- Integral antenna transmitter
- Auxiliary antenna
- Intended for fixed wing aircraft
- Can also suit helicopters, but with a special mounting tray (45° nose down)
- The “mounting bracket” must be ordered separately
SPECS
- Automatic Fixed Emergency Locator Transmitter with G-Switch sensor
- RTCA DO-160°/EUROCAE ED14 Environmental conditions
- TS0/ETSO Approved TSO-C126a, C142a / ETSO 2C91a, 2C126, C142a
- Weight: 878 g. (Max)
- Transmitter Dimensions: 137x 86 x 75.4 mm
- Overall dimensions: 285 x 119x 86.4 mm
Integra AP
