Spectracom PresenTense Network Time Management Software
                             PresenTense Time Server s-e-ntp-pts-01
                                 
		               

Installation Instructions and Summary of Operation:

   The "PresenTense Time Server" folder on this CD contains a file called ptsvrdemo.exe.  Open 
   the folder, double-click on this file, and then click "Run" to install the selected program 
   on the PC. The Setup Wizard will walk you through the installation process.

   Once the PresenTense Time Server program has been installed, you can open this program by 
   selecting "PresenTense Server" from the Start/Programs menu. After opening the program, you 
   will need to configure the desired primary and backup reference time servers with which to 
   synchronize.  You will also have to configure how often the PC will synchronize, where the 
   Syslog server will send logs (if desired), and the SMTP server address to which alert messages 
   will be sent (if desired).

   Note: The primary and backup (if desired and available) time sources should both be Spectracom 
         NTP time servers on the network.  It is highly recommended that two NTP time servers be 
         installed on the network to provide redundancy.

   1) To configure the primary and backup time references, click on the Settings tab and choose 
      "Internet Time Server" as the reference time source.  Then click on the "Internet Time 
      Server" tab and enter the IP address of the desired time source.

   2) To configure the synchronization interval, select the desired 
      interval in the "Synchronize Every" box in the "Internet Time Server" tab.

   3) To configure the program to automatically send logs to a Syslog server on the network, click
      on the Settings tab and enter the IP address of the Syslog server in the Alarm Notification 
      box.

   4) To configure the program to automatically send alert messages to an email address on the 
      network, click on the Settings tab and enter the IP address of the SMTP server in the Alarm 
      Notification box.